This IS “The Senko” not a knock off as you may find elsewhere. From bow to transom and every little rib in between it is to exact specifications. As Do-It has done in the past they have teamed up with Gary Yamamoto and he has given Do-It the license to manufacture a do it yourself mold to create a bait with the very same specifications as his legendary Senko, one of the most popular soft plastic baits in history.
Each mold has four cavities.
Senko Lamination Plates let you pour laminated (2-color) Senkos. Simply clamp the plate onto the mold to pour your first color. Then, once the mold has cooled, remove the plate, close and clamp your mold, then pour your second color. Please note that the 4", 5", and 6" Senko molds DO NOT USE the same lamination plate. Separate lamination plates are required for each mold.
Warning Notice to Commercial Lure Manufacturers:
On February 19, 2002, Gary Yamamoto Custom Baits, Inc obtained a U.S. Trademark registration for the name “SENKO”. Any use of this name in whole or in part or sufficiently similar name used for commercial or non-commercial purposes, without the written consent of Gary Yamamoto Custom Baits, Inc is a potential trademark infringement. Trademark infringements involve the potential for significant civil damages, including in particular cases, statutory damages, liability for up to three times actual damages and attorneys’ fees.