Warning: This product can expose you to chemicals including lead, which is known to the Sate of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to DiamondFinish Clear is a crazy tough, ultra clear top coat that can be applied direct to metal or over other coatings. DiamondFinish Clear remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
- Formulated to apply directly over other coatings and paints or direct to metal (DTM)!
- Permanent clear coat, high solids (over 60%), and low VOC's clear coat.
- Apply direct to painted surfaces for an unbeatably hard top coat.
- Water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking, or peeling.
- Exterior grade UV Stable Clear Coat. DiamondFinish Clear is not affected by sunlight. Does not chalk, yellow, or fade.
- Can be applied with a brush (without leaving any brush marks), roller and conventional spray gun.
- Compatible with fully cured water based acrylics, urethanes, and other water based base coats to add protection, durability, and clarity.
- Unlike normal two part (2K) coatings, no hardener or activator is needed. You can simply stir well and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit.
*PLEASE NOTE* - federal regulations require these products to ship via ground transportation. This may result in slightly longer shipment times to some destinations. Sorry, but we are unable to ship these products to international destinations.
