The 3.5" & 4.5" tubes make awesome baits, every time.
Tube molds require the use of a spline and a tube insert. The spline makes the skirt and the tube insert makes the tube body hollow.
Tubes and Splines can be found in the Related Products located at the bottom of this page. Be sure to check to make sure what sizes will fit in this mold.
The spline fits like a glove and there is no flashing. There are three splines to choose from. The standard spline has 18 strand, the spike spline has 15 Strands, and the squiggle spline has 6 strands. These molds will accept all 3 spline inserts.
There are multiple lengths of tube inserts available so you can customize the thickness of the head. The 3.5" mold uses any tube insert size up to a 1.5" insert. The 4" mold uses any tube insert size up to a 2.25" insert.
Be sure to add a touch of softener or worm oil to the insert and tube insert so the finished tube slides right off.
Tubes and Splines can be found in the Related Products located at the bottom of this page. Be sure to check to make sure what sizes will fit in this mold.
The spline fits like a glove and there is no flashing. There are three splines to choose from. The standard spline has 18 strand, the spike spline has 15 Strands, and the squiggle spline has 6 strands. These molds will accept all 3 spline inserts.
There are multiple lengths of tube inserts available so you can customize the thickness of the head. The 3.5" mold uses any tube insert size up to a 1.5" insert. The 4" mold uses any tube insert size up to a 2.25" insert.
Be sure to add a touch of softener or worm oil to the insert and tube insert so the finished tube slides right off.
