Warning: This product can expose you to chemicals including lead, which is known to the Sate of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to PETG lure lips are an excellent and more affordable alternative to traditional polycarbonate lure lips. PETG (Polyethylene Terephthalate Glycol) provides the same optical clarity as polycarbonate, and you'd be hard-pressed to tell the two apart in a side-by-side comparison. PETG exhibits comparable impact resistance to polycarbonate, so lure lips manufactured from PETG can handle abrasion and tough conditions very well. PETG material is more resistant than polycarbonate to yellowing and degradation due to sun and UV exposure, so lure lips made with PETG will look great for a longer period of time.
Our PETG lips are laser cut for consistency, accuracy, and exceptionally smooth edges. Each lip ships with a protective film that should be removed prior to use.
| Model Number |
Stock Number |
Length | Maximum Width |
Minimum Width |
Thickness |
| PE-LCT-1 | 872351 | 1.0 | 0.76 | 0.37 | 0.060" |
| PE-LCT-2 | 872352 | 1.25 | 0.76 | 0.37 | 0.060" |
| PE-LCT-3 | 872353 | 1.5 | 0.87 | 0.44 | 0.060" |
| PE-LCT-4 | 872354 | 1.125 | 0.69 | 0.38 | 0.060" |
| PE-LCR-5 | 872355 | 1.0 | 0.82 | 0.40 | 0.060" |
| PE-LCR-6 | 872356 | 1.25 | 0.82 | 0.43 | 0.060" |
| PE-LCR-7 | 872357 | 1.5 | 0.81 | 0.41 | 0.060" |
| PE-LCR-8 | 872358 | 1.125 | 0.75 | 0.38 | 0.060" |
| PE-LCS-9 | 872359 | 1.0 | 0.75 | 0.47 | 0.060" |
| PE-LCS-10 | 872360 | 1.125 | 0.82 | 0.44 | 0.060" |
| PE-LCS-11 | 872361 | 1.0 | 0.99 | 0.65 | 0.060" |
| PE-LCC-12 | 872362 | 1.0 | 0.75 | 0.38 | 0.060" |
| PE-LCC-13 | 872363 | 1.25 | 0.82 | 0.44 | 0.060" |
| PE-LCC-14 | 872364 | 1.75 | 1.11 | 0.45 | 0.060" |
| NOTE: All measurements above are approximate. | |||||
