Do-it Injectors are incredibly easy to use. Both sizes are designed to work with Do-it CNC and Do-it Essentials injection molds. The 4 oz. injector works great for small to medium-size baits, while the 6 oz. injector is perfect for larger baits, including big Senkos, worms, shad, and craws.
To use your Do-it injector, simply pull on the injector handle to fill it with melted liquid plastic, then push the melted plastic into your injection mold until you feel slight resistance. Do-it Injectors are made from machined aluminum for quicker cooling between liquid plastic refills.
Nozzle measurements for Do-It Injectors:
- Exterior nozzle diameter - approximately 5/8"
- Interior nozzle diameter - approximately 3/8"
- Nozzle length - approximately 1/4"
The nozzles on the Do-It injectors do not have a locking pin.
Please note: Heat resistant gloves should always be used when pouring worms and other soft baits with plastic injectors. Do-it injectors do not use a locking pins to hold the nozzles on. Additional care and awareness should be used.
This product works great!!
This is my first time making my own baits, this injector made my life a lot easier. Barlowstackle was great contact for me they helped a lot during the purchase through emails. A+++ Service for sure.
Way too expensive for me