The 4" Craw Tube makes an awesome bait, every time. The head is smooth and the body has a unique scallop that really shows off the glitter.
Tube molds require the use of a spline and a tube insert. The spline makes the skirt and the tube insert makes the tube body hollow.
Tubes and Splines can be found in the Related Products located at the bottom of this page. Be sure to check to make sure what sizes will fit in this mold.
The spline fits like a glove and there is no flashing. There are three splines to choose from. The standard spline has 18 strand, the spike spline has 15 Strands, and the squiggle spline has 6 strands. This mold will accept all 3 spline inserts and will accept tube inserts up to 2".
There are multiple lengths of tube inserts available so you can customize the thickness of the head. Tube insert size listed below will work with with this mold.
Be sure to add a touch of softener or worm oil to the insert and tube insert so the finished tube slides right off.
Tubes and Splines can be found in the Related Products located at the bottom of this page. Be sure to check to make sure what sizes will fit in this mold.
The spline fits like a glove and there is no flashing. There are three splines to choose from. The standard spline has 18 strand, the spike spline has 15 Strands, and the squiggle spline has 6 strands. This mold will accept all 3 spline inserts and will accept tube inserts up to 2".
There are multiple lengths of tube inserts available so you can customize the thickness of the head. Tube insert size listed below will work with with this mold.
Be sure to add a touch of softener or worm oil to the insert and tube insert so the finished tube slides right off.
| Insert Size | Tube Head Thickness |
| 0" | 2-1/8" Full Hard Head |
| 0.75" | 1-3/8" |
| 1.0" | 1-1/8" |
| 1.25" | 7/8" |
| 1.5" | 5/8" |
| 1.75" | 3/8" |
| 2" | 1/8" |
