Warning: This product can expose you to chemicals including lead, which is known to the Sate of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to Barlow's Epoxy Powder Paint is an epoxy paint in a powder form. The paint is applied and cured by a heat cycle. Basic procedure is to dip a heated item (jig head) into the powder. The heat causes a layer of powder to adhere to the item and flow into a smooth, hard coating.
Heat lures to be painted using a heat gun for or alcohol burner for 7 to 10 seconds, or heat for 10 minutes in an oven preheated to 350 degrees. Quickly dip the lure into the paint and remove, shaking off any excess paint. Cure at 350 degrees for 10 minutes for added durability.
Powder Paints will settle and pack slightly over time. Shake or mix Powder Paint before using. Paints are sold by weight not volume so some bottles may be fuller than others.
Note: These colors do not match up to the Component Systems colors. Due to difference in computer monitors color in the pictures below may vary slightly from the final color.
800-707-0208
